I got a buried concrete (storm water) drain pipe that I am trying to figure if it is ok to run a heavy load across. I have the Concrete Pipe Design Manual and it is clear how to get the loads. I just don't get how to figure the strength. It appears there are "classes".....but I don't see a corresponding load to each class (at least within the manual, I have seen it elsewhere). Does anyone know how to figure what these pipes are good for? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Concrete Pipe Strength Evaluation 1
- Thread starter WARose
- Start date
If the cover depth is bigger than 10 ft (3 meters) the live load is insignificant (ACPA manual - 2011 ed - Table 42.Notes)
If You need a FEA software You can Download (free, but You need Mathcad) the software CANDE (Culvert Analysis and Design)
If You need a FEA software You can Download (free, but You need Mathcad) the software CANDE (Culvert Analysis and Design)
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question