Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete Anchors that do not require special inspection..

Status
Not open for further replies.
glad8tor

glad8tor

Civil/Environmental
Joined
May 28, 2008
Messages
5
Location
US
I have been specifying Hilti KB-TZ or HIT HY150 anchors, but all require special inspection...Are there any anchors that do not require special inspection per CBC 07? (preferrably with an ICC or ESR report) even if the values are smaller... (UBC allows no spcial inspection on some anchors)..

Thank you.
 
Status
Not open for further replies.

Similar threads

Ryan.z
  • Locked
  • Question Question
ISO 10042_weld aluminium alloy standard do not mention about weld penetration???
Replies
1
Views
613
kingnero
kingnero
rollingcloud
  • Locked
  • Question Question
Thread length not affecting tensile strength?
Replies
15
Views
1K
rollingcloud
rollingcloud
kourosh1
  • Locked
  • Question Question
bonding stress between plate and concrete
Replies
3
Views
630
HTURKAK
HTURKAK
HouseBoy
  • Locked
  • Question Question
Bonding Cor-ten plate to a concrete wall
Replies
14
Views
2K
SwinnyGG
SwinnyGG
JoshRanch
  • Question Question
AWS 5.01 Requirements for reviewing Filler Metal Supplier Quality Program
Replies
1
Views
418
David3399
D

Part and Inventory Search

Sponsor

Back
Top