Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Computing Scalar

Status
Not open for further replies.
staryash

staryash

Bioengineer
Joined
Jun 15, 2006
Messages
8
Location
CH
I have a query related to comparing the ABAQUS results.

While viewing results, in the results options, by default the option is : "Compute Scalars before averaging" and the averaging threshold is set at 75%.

Second option is "compute scalars after averaging".

I can see the variation between no averaging and averaging, however what is the advantage or disadvantage of using "compute scalars after averaging"?

I check the ABAQUS manual, it does not state the advantage and disadvantage (I could not find this out).

Thanks
 
Status
Not open for further replies.

Similar threads

VaidehiChennubhotla
  • Locked
  • Question Question
Error in defining or computing beam section normal in 12 elements.
Replies
3
Views
1K
FEA way
FEA way
ahildershavn
  • Locked
  • Question Question
Abaqus and parallel computing
Replies
2
Views
219
Mustaine3
Mustaine3
AugustoRomero
  • Locked
  • Question Question
Parallel Computing on Abaqus
Replies
2
Views
199
DrBwts
DrBwts
mageldai
  • Locked
  • Question Question
Edit Field Output Request to reduce computing time/ file size?
Replies
2
Views
230
testing
testing
Luja
  • Locked
  • Question Question
Error in defining or computing beam section normal
Replies
0
Views
305
Luja
Luja

Part and Inventory Search

Sponsor

Back
Top