Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Compressibility of styrene monomer
- Thread starter ausimat
- Start date
Answer to 1st question is no. As for the 2nd question, if you can obtain the acoustic wave speed and density for the material, the relation to bulk modulus of compressibility is:
K = rho*c^2
where
K = bulk modulus of compressibility
rho = density
c = acoustic wave speed (compression waves)
Generally, it is much easier to measure density and acoustic wave velocity experimentally and calculate bulk modulus of compressibility than it is to directly measure bulk modulus of compressibility.
K = rho*c^2
where
K = bulk modulus of compressibility
rho = density
c = acoustic wave speed (compression waves)
Generally, it is much easier to measure density and acoustic wave velocity experimentally and calculate bulk modulus of compressibility than it is to directly measure bulk modulus of compressibility.
- Status
Similar threads
- Locked
- Question
- Question