Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Composite Beam Studs
- Thread starter jakeh76
- Start date
VoyageofDiscovery
Structural
Hi jakeh76,
In bridge decks, typically one wants the underside of the stud head to the top of the bottom transverse rebar to be greater than one inch.
Regards
VOD
In bridge decks, typically one wants the underside of the stud head to the top of the bottom transverse rebar to be greater than one inch.
Regards
VOD
- Status
Similar threads
- Question
- Locked
- Question