Combine curves

[MNasrulIshak]

Hi all..good day..

I try to combine 2 or 3 curves to become 1 and will use that curve to create edge surface.I tried using combined/composite curves in Meshing Toolbox but the curve just change color and cannot be select as 1 curve.Anyone can solve it?

 

[Naffoussi]

Go to Surface / NonManifold Add, select the surfaces of interest to merge their common curves.
Then go to the Meshing Toolbox use the combined/composite curves / add by point to merge curves.

Let me know if it works for you

Regards,

Seif Eddine Naffoussi, Stress Engineer

http://www.Innovamech.com

33650 Martillac – France