Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cold working or cold rolling of API threads

Status
Not open for further replies.
oezguel

oezguel

Mechanical
Aug 11, 2009
8
Hi people!

We need to process cold working/cold rolling on API threads of drill stem subs.
how much pressure must we apply??
is there any table about pressure rate of cold working/cold rolling
 
Status
Not open for further replies.

Similar threads

mrgene71
  • Locked
  • Question
API BOX THREADS
Replies
1
Views
1K
MechyMarco
MechyMarco
AAI74
  • Locked
  • Question
API 5L- pipes out of dimenisons
Replies
2
Views
2K
Vegas Consulting
Vegas Consulting
nabeel3
  • Question
API 650_Polygon shape for Bottom plate
Replies
3
Views
3K
Vegas Consulting
Vegas Consulting
Lorenzo Loreto
  • Locked
  • Question
API 650 Tank Rebuild - Type and quantity of weld inspections 2
Replies
8
Views
5K
IFRs
IFRs
S
  • Question
API 5L mass per unit length
Replies
3
Views
4K
Vegas Consulting
Vegas Consulting

Part and Inventory Search

Sponsor

Back
Top Bottom