Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cold bends on onshore pipeline

Status
Not open for further replies.
FilippoT

FilippoT

Mechanical
Joined
Oct 13, 2013
Messages
34
Location
IT
Is there any reference into Asme B31.8 stating the maximum or minimum bending radius for the field bends to be executed into onshore pipeline?
 
Sort by date Sort by votes
Do you have a copy?

If so you can't have looked at it. Try table 841.2.3-1

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Yoga Arviansyah
  • Locked
  • Question Question
Gas Pipeline Reversal
Replies
2
Views
2K
GD2
GD2
Jack.C
  • Locked
  • Question Question
Pipeline Drainage - Simplified Approach
Replies
15
Views
7K
pierreick
pierreick
jonjose123
  • Locked
  • Question Question
Settlement of Oil Pipeline due to Leakage of Water Pipeline.
Replies
9
Views
4K
Snickster
Snickster
jafary64
  • Question Question
Hot Dip or Cold Galvanized for Stud bolt in Piping
Replies
14
Views
5K
MintJulep
M
jonjose123
  • Locked
  • Question Question
Pipeline Pig Tracking
Replies
7
Views
3K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top