Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cohesive zone model czm

Status
Not open for further replies.
rubi2007

rubi2007

Aerospace
Joined
May 30, 2007
Messages
2
Location
VE
Hi, all
I like to know how to use the czmesh command; particularly ecomps1,ecomps2. How to define this in the model of one fiber and matrix subject to transverse load perpendicular to the fiber? Please I will appreciate your help.
BYE,
JL Mendez-Orellana
 
Status
Not open for further replies.

Similar threads

vickyiamlucky
  • Locked
  • Question Question
Ansys Symmetry model to full model cut boundary dispacemnt or force bc
Replies
0
Views
727
vickyiamlucky
vickyiamlucky
Jeremy1989
  • Locked
  • Question Question
Difference in Von Mises Results Between Beam Model and 3D Model
Replies
2
Views
550
Stick.
Stick.
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
andradesilva
  • Locked
  • Question Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
588
gnc89
gnc89
struclearner
  • Locked
  • Question Question
Beams Modeling Bolts “Behavior” Options
Replies
2
Views
2K
struclearner
struclearner

Part and Inventory Search

Sponsor

Back
Top