Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Coffin-Manson Equation for an adhesive

Status
Not open for further replies.
franck

franck

Aerospace
Joined
May 29, 2001
Messages
48
Location
ES
Hi all,

I would like to qualify our bonding process for the heaters that are going to remain permanently attached on a Spacecraft.

I am trying to calculate an Acceleration Factor for the adhesive (Scotchweld 3M). Currently I am guessing a Coffin-Manson exponent of 6 but I am not convinced if it is conservative enough.

Do you have some value or some reference to suggest?

Franck
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
Seeking Guidance on Developing an Adhesive Coating Formula
Replies
5
Views
4K
btrueblood
btrueblood
Stopblock
  • Locked
  • Question Question
Need Help Finding Adhesive
Replies
1
Views
1K
dik
dik
J.Platt
  • Locked
  • Question Question
Adhesive for grit on a stainless roller
Replies
2
Views
1K
Compositepro
Compositepro
K.P.M.
  • Locked
  • Question Question
Adhesive for Cryogenic application
Replies
1
Views
1K
MintJulep
M
EIJPN
  • Locked
  • Question Question
Low viscosity adhesive for graphite
Replies
1
Views
949
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top