Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Coefficient friction for material combinations
- Thread starter avangasse
- Start date
EdStainless
Materials
Are you really looking for friction numbers? Very light loads and well prepared surfaces?
They are listed in the CRC Handbook of Chemistry and Physics.
If you have enough load or motion that you expect wear, then you are not talking about simple friction any more and you need to find mixed couple wear data.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
They are listed in the CRC Handbook of Chemistry and Physics.
If you have enough load or motion that you expect wear, then you are not talking about simple friction any more and you need to find mixed couple wear data.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
- Status
Similar threads
- Question
- Locked
- Question