Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Code for pneumatic conveyor tank cyclone separator impingement tank

Status
Not open for further replies.
henerythe8th

henerythe8th

Structural
Joined
Dec 27, 2002
Messages
40
Location
US
What code applies to a pneumatic conveyor systems cyclone separator (aka impingement tank). ASME B&PV specifically excludes separators and 15psi and below. Anyone got an idea?

One of the places that this is going to is-- what code would be used to weld AR plate with a strength greater than 100ksi (which is specifically excluded by AWS D1.1)?
 
Status
Not open for further replies.

Similar threads

M
Tank Overturning Stability Criteria
Replies
5
Views
10K
sdz
sdz
Weldinspect
Weld on a UL tank
Replies
11
Views
11K
Weldinspect
Weldinspect
C
  • Question Question
Product Misalignment at Conveyor Transition
Replies
12
Views
6K
mfgenggear
mfgenggear
sraomberts
  • Locked
  • Question Question
Conveyor Tracking Help
Replies
8
Views
5K
Compositepro
Compositepro
Green 123
  • Locked
  • Question Question
Pneumatic Differentiator
Replies
18
Views
10K
Orange_kun
Orange_kun

Part and Inventory Search

Sponsor

Back
Top