Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CNODE

Status
Not open for further replies.
Rodrigodigiacomo

Rodrigodigiacomo

Petroleum
Joined
Aug 2, 2010
Messages
1
Location
BR
I use CNODE to imput displacements in my anchor, is this the best way to make it?
 
Sort by date Sort by votes
It works very well so why not so long as the results are realistic - which they should be.
 
Upvote 0 Downvote
You could equally just impose displacements, e.g. 0 = fixed, then you don't need cnodes.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nick262b
  • Locked
  • Question Question
CAESER II Cnodes not working no forces at node in restraint summary?
Replies
1
Views
631
nick262b
nick262b
JackBolt
  • Locked
  • Question Question
CNODE to Model Displacements?
Replies
4
Views
675
richay
richay
Erhard
  • Locked
  • Question Question
High Pump Nozzle Loads & Use Of Stiffness Coeff. on CNode's On Anchors
Replies
3
Views
419
Pipingtop
Pipingtop

Part and Inventory Search

Sponsor

Back
Top