Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CMU Control Joints 1
- Thread starter tft2001
- Start date
-
1
- #2
According to some NCMA guidelines I've seen in the past, the interior wall joint spacing can be somewhat larger due to a smaller variation in thermal temperatures and also humidity changes.
In my area, we typically see 24 ft. exterior spacing and 32 ft to 36 ft interior.
In my area, we typically see 24 ft. exterior spacing and 32 ft to 36 ft interior.
- Status
Similar threads
