Dec 3, 2010 #1 mweck Electrical Dec 3, 2010 2 Does anyone know where I can get samples of clear PCTFE?
Dec 3, 2010 #2 Demon3 Materials Jun 6, 2005 1,850 http://cshyde.thomasnet.com/viewitems/films/halar-ectfe-film? Is that the stuff? Chris DeArmitt PhD FRSC CChem http://www.phantomplastics.comConsultant to the plastics industry Upvote 0 Downvote
http://cshyde.thomasnet.com/viewitems/films/halar-ectfe-film? Is that the stuff? Chris DeArmitt PhD FRSC CChem http://www.phantomplastics.comConsultant to the plastics industry
Dec 3, 2010 Thread starter #3 mweck Electrical Dec 3, 2010 2 Thanks Chris, I don't think so (but I'm not sure). ECTFE is Ethylene-chlorotrifluoroethylene (Halar) PCTFE is Polychlorotrifluoroethylene (Kel-f, or Neoflon, Aclar) I'm also intested in rigid sheets (if thats possible) 1 to 3 mm in thickness. Eventually, I'd be interested in injection molding it. Regards. Upvote 0 Downvote
Thanks Chris, I don't think so (but I'm not sure). ECTFE is Ethylene-chlorotrifluoroethylene (Halar) PCTFE is Polychlorotrifluoroethylene (Kel-f, or Neoflon, Aclar) I'm also intested in rigid sheets (if thats possible) 1 to 3 mm in thickness. Eventually, I'd be interested in injection molding it. Regards.
Dec 4, 2010 #4 Demon3 Materials Jun 6, 2005 1,850 In that case I'd suggest contacting these people: http://www.boedeker.com/pctfe_p.htm They can help with that and most other high performance plastics. Chris DeArmitt PhD FRSC CChem http://www.phantomplastics.comConsultant to the plastics industry Upvote 0 Downvote
In that case I'd suggest contacting these people: http://www.boedeker.com/pctfe_p.htm They can help with that and most other high performance plastics. Chris DeArmitt PhD FRSC CChem http://www.phantomplastics.comConsultant to the plastics industry
Dec 6, 2010 #5 HDS Mechanical Jul 25, 2002 661 You could talk to Diakin or Arkema they should be able to find you samples and a molder. PCTFE can be found in sheets (boedeker has them) but I'm not sure I've seen clear ones for sale. The properties are different in clear and opaque because of the crystalline/amorphous ratio. Upvote 0 Downvote
You could talk to Diakin or Arkema they should be able to find you samples and a molder. PCTFE can be found in sheets (boedeker has them) but I'm not sure I've seen clear ones for sale. The properties are different in clear and opaque because of the crystalline/amorphous ratio.
