Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

classes

Status
Not open for further replies.

sandblz

Automotive
Joined
Apr 14, 2009
Messages
1
Hi i am 20 years old and i am interested in starting a machine shop to make custom parts for recreational sports and i was wondering what classes i should take and is there any thing i should know before i get started i am currently a service writer in my parent auto repair shop i have always enjoyed making thing this has been my dream for the last several years my dad is planning on retiring in the next 5-10 years and i plan on making his shop into my shop but i don't know what classes i need to take so i can get started. any advice is always helpful thank you
 
In the past I would have recommended you go to some vocational education classes but since many of these schools have closed you will probably have to go to a university offering some sort of a manufacturing engineering or industrial engineering courses which have shop classes. Don't expect to be able to estimate a job, tool it and make it with a complex part. That takes experience you get from working in a machine shop environment for some time. I actually went to a vocational school and received and received a machine shop technology certificate many years ago. I worked in industry for many years as a machinist, an N/C programmer, a manufacturing engineer and then moved into purchasing. I lost my job and finally went and got a manufaturing engineering technology degree. Experience is probably the best teacher after some basic training.

The school I finally got my degree at was Pittsburg State University in Pittsburg, Kanasa.

Good luck in your pursuits.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top