Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Circuitworks help

Status
Not open for further replies.
DHALE1

DHALE1

Mechanical
Joined
Jan 8, 2003
Messages
61
Location
US
Has anyone used Circuitworks to import an ascII file from pads software. I was able to import a board, but had to input all the component heights when I brought it in. We were wondering if their is a place in pads to enter component height. Any tips would be great.

Thanks
 
Status
Not open for further replies.

Similar threads

Channo
  • Locked
  • Question Question
Need help with increasing poly count of 3D model
Replies
9
Views
1K
3DDave
3DDave
joshF
  • Locked
  • Question Question
Need Help with Auto Dimension Macro
Replies
3
Views
712
TheTick
TheTick
H
Little help here please
Replies
0
Views
3K
Hermann
H
D
Help needed - Newish to solid works
Replies
1
Views
3K
Cadasio
C
M
Help with a design
Replies
0
Views
2K
Morganfletcher
M

Part and Inventory Search

Sponsor

Back
Top