Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Choosing PDM for MDT

Status
Not open for further replies.
linqur

linqur

Mechanical
Joined
Mar 10, 2001
Messages
100
Location
US
Hi
We are trying to choose a PDM for our engineering company.
SmartDesk from SmartTeam has come to our attention.
Does anybody have any comments about this program:
proce, is it reliable or does it create any problems?
Could you suggest any other PDM packages?

Regards,
Linqur
thankful for any hints
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
calculation for tightening torque
Replies
5
Views
15K
dtimberlake
D
moiz19670309
  • Question Question
Hole size with tolerance for Shaft
Replies
7
Views
3K
Gr8blu
Gr8blu
R
  • Question Question
Looking for Help with Air Cylinder Selection for X-Z Slide Configuration
Replies
5
Views
3K
Stick.
Stick.
Sal Sham
  • Question Question
using a deep cycle battery for a forklift
Replies
4
Views
8K
TugboatEng
TugboatEng
JL2024
  • Locked
  • Question Question
NDE for PSVs
Replies
1
Views
2K
drawoh
drawoh

Part and Inventory Search

Sponsor

Back
Top