Junior Process Eng.
Chemical
Hello everyone,
I´m working for a Chlor-Alkali plant as a graduate process engineer and this is my first experience in engineering.
I was recently tasked with calculating the current efficiency for our production lines and done some research but I cannot find a method to do it. A more experienced commissioning engineer mentioned something about sulphates key and product in tank methods, that being ionics and ineos. I cannot contact this person for another month or so and was interested to find out about these methods or any other available ones until then. In O'Brien's HB of CA I find scarce information and nothing related to the above mentioned methods.
Would any of you be able to point me to the right direction, please?
Thank you,
JPE
I´m working for a Chlor-Alkali plant as a graduate process engineer and this is my first experience in engineering.
I was recently tasked with calculating the current efficiency for our production lines and done some research but I cannot find a method to do it. A more experienced commissioning engineer mentioned something about sulphates key and product in tank methods, that being ionics and ineos. I cannot contact this person for another month or so and was interested to find out about these methods or any other available ones until then. In O'Brien's HB of CA I find scarce information and nothing related to the above mentioned methods.
Would any of you be able to point me to the right direction, please?
Thank you,
JPE
