My plant will be installing new chemical pumps and need a base for two W&T polymer pumps. Does anyone have information on companies that make stands or bases for pumps? I would like to raise them 10" to 12" inches off the floor. Any help would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Chemical pump stands?
- Thread starter Pump2005
- Start date
STYMIEDPIPER
Mechanical
Great chemical pump baseplates
Locate Flowserve "Durco Mark 3 ANSI Chemical Process Pumps" Bullentin PS-10-13(E).
Corrosion resistant Mark 3 pre-engineered baseplates Type A thru E.
Also review the Flowserve Polyshield Polymer baseplate & foundation system.
Also can install concrete pedestal with corrosion resistant outer cover. In addition, may use appropriate corrosion material steel if raising only 10-12 inches.
Locate Flowserve "Durco Mark 3 ANSI Chemical Process Pumps" Bullentin PS-10-13(E).
Corrosion resistant Mark 3 pre-engineered baseplates Type A thru E.
Also review the Flowserve Polyshield Polymer baseplate & foundation system.
Also can install concrete pedestal with corrosion resistant outer cover. In addition, may use appropriate corrosion material steel if raising only 10-12 inches.
- Status
Similar threads
- Locked
- Question
