Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Checking the strength of connection UG-41

Status
Not open for further replies.
fakhfakh

fakhfakh

Industrial
Joined
Nov 11, 2004
Messages
48
Location
TN
Dear All
When checking the strength of reinforcement of connection elements (nozzle to shell/head), can some one explain why the calculation is based only on half the section? (For example: Strength of Nozzle wall shear = 3.14/2 .Dn.tn.S)
 
Status
Not open for further replies.

Similar threads

RiyadhBPV
  • Question Question
Effect of external corrosion allowance on UG-40 normal to shell limit calculation
Replies
5
Views
3K
SnTMan
SnTMan
aiwa7777
  • Locked
  • Question Question
UG-21
Replies
2
Views
1K
aiwa7777
aiwa7777
M
  • Question Question
Joint efficiency - UG-27 ASME BPVC
Replies
18
Views
8K
MartinVT
M
jt1234
  • Question Question
Div. 1, UG-37, Correction factor "F" not making sense
Replies
1
Views
2K
Geoff13
Geoff13
CrisDom
  • Locked
  • Question Question
Extent of UG-44(b) to ASME I equipment
Replies
4
Views
5K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top