Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Checking material

Status
Not open for further replies.
deyentl

deyentl

Materials
Joined
Jul 12, 2011
Messages
39
Location
GB
Hi guys,

I'm looking for a method to find the material or section used in a certain point of the odb. If possible, I would like to have a method that works for a random point and not necessarily a node or integration point.

Do you have any ideas on how to do this?

Best regards,
deyentl
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
Material units
Replies
3
Views
12K
DanStro
DanStro
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
polak7
  • Solved
ECAP - material flows between the punch and the die?
Replies
4
Views
8K
polak7
polak7
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way
liq001
  • Locked
  • Question Question
Material calibration
Replies
8
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top