Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cheap spiral miter gears 1/2 in bore

Status
Not open for further replies.
lightningbob

lightningbob

Aerospace
Joined
Feb 2, 2012
Messages
1
Location
US
...ok where can I get them? I need 14 for a project @ speeds up from 6,000 to 20,000 rpm. Found some @ $40 each but looking for a deal as I don't want to spend too much money on a pototype.
Thx in advance.
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
Planetary Gears - Independent Rotation
Replies
4
Views
13K
BrianPetersen
BrianPetersen
T
  • Locked
  • Question Question
Can gears mesh with different operating pressure angle?
Replies
7
Views
4K
mfgenggear
mfgenggear
M
  • Question Question
Is there any reason a forged replacement gear would cause problems to surrounded cast gears?
Replies
9
Views
3K
dgeesaman
dgeesaman
SMKRe
  • Locked
  • Question Question
Frictional heat generation in double helical gears while meshing.
Replies
0
Views
338
SMKRe
SMKRe
SMKRe
  • Locked
  • Question Question
Teeth friction loss in double helical gears?
Replies
1
Views
366
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top