Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Charpy testing on inlaid carbon steel material

Status
Not open for further replies.
1THN1

1THN1

Mechanical
Joined
Apr 7, 2008
Messages
9
Location
NO

When charpy testing carbon steel weld inlaid with 5mm Inconel must the test specimen include the inlay or not according to BPVC section V?

Test temperature is -46°C.
 
Sort by date Sort by votes
1THN1;
The notch toughness concern is the base metal (CS) heat affected zone (HAZ) at -46 deg C, not the Inconel. So, placement of the notch must be in the base metal HAZ.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Andrewstructure
  • Locked
  • Question Question
Cast Steel - Johnstown Works Grade SX, .10-.20 C
Replies
0
Views
721
Andrewstructure
Andrewstructure
qcrobert
  • Locked
  • Question Question
How can steel manufacturer chemical composition differ from ASTM/ASME chem comp?
Replies
5
Views
1K
qcrobert
qcrobert
N AHMAD
  • Locked
  • Question Question
TESTING OF DUAL CERTIFICATION F316/F316L.
Replies
4
Views
547
N AHMAD
N AHMAD
harmsgundam
  • Locked
  • Question Question
ASTM C150 on Heat of Hydration Requirement
Replies
0
Views
604
harmsgundam
harmsgundam
N AHMAD
  • Locked
  • Question Question
CARBON MOLYBDENUM STEEL EQUIVALENT FORGED FORM
Replies
1
Views
285
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top