Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

changing the Link of drawing

  • Thread starter Thread starter Anishmvj
  • Start date Start date
Status
Not open for further replies.
A

Anishmvj

Guest
Hi friends,


I have a problem regarding the 'changing the link' of generated views in CATDrawing. The views are linked to a CATProduct(consists of only one CATPart) . Now,I need toreplace the link of the drawing from 'CATProduct file' to 'CATPart file' (CATPart is the same as the one in CATProduct file). I tried 'Edit-Links' menu but it seems that a drawing linked to CATProduct cannot be replaced with CATPart. Is there any solution for this? Please help me in this regard.
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
DRAWING PROJECTION ANGLE CHANGING
Replies
1
Views
4K
jackk
jackk
Med Che
  • Question Question
How to get the link of a 2D Component Instance from a Drawing Catalog in CATIA VBA?
Replies
3
Views
5K
Little Cthulhu
Little Cthulhu
hoangthe
  • Locked
  • Question Question
GET THE FOLDER LINK OF .CGR IN PRODUCT (FULLNAME)
Replies
0
Views
327
hoangthe
hoangthe
A
CATIA v5 Generative Drafting Drawing Links
Replies
1
Views
1K
MrCATIA
M
A
  • Question Question
Does BOM have links to which drawings are using the parts in it?
Replies
0
Views
6K
aerostudent2618
A

Part and Inventory Search

Sponsor

Back
Top