Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change the name to surfaces

Status
Not open for further replies.
DavideITA

DavideITA

Aerospace
Joined
Dec 14, 2014
Messages
14
Location
IT
It may seem a trivial matter, but I could not find the answer anywhere.
 
Sort by date Sort by votes
Dear David
Is simply; in the MODEL INFO tree under geometry tree simply click in the name of the surface body and change the name ...
Best regards,
Blas.

~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director

IBERISA
48004 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
 
Upvote 0 Downvote
Incredible, so complicated, so simple. Thanks Blas, I take this opportunity to thank you for tutorials on youtube and for your blog; two useful resources.
Best regards.
 
Upvote 0 Downvote
then an LPS ("great post") is probably warranted ...

another day in paradise, or is paradise one day closer ?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

manees90
  • Locked
  • Question Question
How to Mesh Surfaces with 90-Degree Bends Using Shell Elements to Minimize Artificial Stresses
Replies
1
Views
2K
SWComposites
SWComposites
test123123
  • Locked
  • Question Question
Transient Heat Transfer with 100 Time-Dependent Data Surfaces in FEMAP
Replies
1
Views
2K
karachun
karachun
test123123
  • Locked
  • Question Question
The Unit Temperature Increase validity check
Replies
6
Views
3K
BlasMolero
BlasMolero
Xprivate
  • Locked
  • Question Question
Point Move to Error
Replies
2
Views
3K
Xprivate
Xprivate
E
  • Locked
  • Question Question
sol 402: impose angular velocity to mesh
Replies
2
Views
2K
EdS94
E

Part and Inventory Search

Sponsor

Back
Top