Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
change material
- Thread starter hamadadf
- Start date
You can:
1. use *MODEL CHANGE to activate/deactivate elements in different steps.
2. use UMAT subroutine to code the constitutive response; this subroutine is provided with the step no. and the current time. Therefore, you can change the constitutive response at a specific time.
1. use *MODEL CHANGE to activate/deactivate elements in different steps.
2. use UMAT subroutine to code the constitutive response; this subroutine is provided with the step no. and the current time. Therefore, you can change the constitutive response at a specific time.
- Status
Similar threads
