Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change material assingment (time-dep. material prop.) in transient thermal simulation in ANSYS WB

Status
Not open for further replies.
Zappi01

Zappi01

Materials
Joined
May 10, 2010
Messages
3
Location
DE
Hi,

does anyone know, how to change material properties during a transient thermal simulation in ANSYS workbench (12.1/13.0)? Do I have to use a APDL command snippet? May be I have to do two simulations. Transfer the results from the first to the second with different material assignments.

Thanks in advance and best regards,
Zappi
 
Status
Not open for further replies.

Similar threads

W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
pnomura
  • Locked
  • Question Question
Drop Test in Transient Structural
Replies
1
Views
1K
jamesdean2
jamesdean2
Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top