Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change hydraulic conductivity with failure

Status
Not open for further replies.
hamadadf

hamadadf

Civil/Environmental
Joined
Mar 3, 2006
Messages
62
Location
CA
I want to ask how can i change the hydraulic conductivity in a soil model in failed elements during analysis?
 
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
Determination of Failure for foundations
Replies
1
Views
997
FEA way
FEA way
ShiningEngineer
  • Locked
  • Question Question
Change colour of field visualisation
Replies
1
Views
2K
FEA way
FEA way
jball1
  • Locked
  • Question Question
Connector Damage/Failure
Replies
6
Views
1K
jball1
jball1
Nir_k
  • Locked
  • Question Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
2K
FEA way
FEA way
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D

Part and Inventory Search

Sponsor

Back
Top