BEAEROHEAD
Mechanical
I am unable to create a true chamfer dimension in NX 10. Any tips? (see attached image)
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Chamfer function in NX 10
- Thread starter BEAEROHEAD
- Start date
- Status
Is your chamfer angle 45°?
I believe NX will only apply chamfer dimensions to symmetrical chamfers (those that are 45°). All others need to have standard dimensions applied to define the chamfer (2 offsets; 1 offset and 1 angle).
Tim Flater
NX Designer
NX 11.0.1.11 MP4
Win7 Enterprise x64 SP1
Intel Core i7 2.5GHz 16GB RAM
4GB NVIDIA Quadro K3100M
I believe NX will only apply chamfer dimensions to symmetrical chamfers (those that are 45°). All others need to have standard dimensions applied to define the chamfer (2 offsets; 1 offset and 1 angle).
Tim Flater
NX Designer
NX 11.0.1.11 MP4
Win7 Enterprise x64 SP1
Intel Core i7 2.5GHz 16GB RAM
4GB NVIDIA Quadro K3100M
- Status
