Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Center of gravity

Status
Not open for further replies.

joediz

Mechanical
Joined
Mar 18, 2002
Messages
1
Location
US
I need to find out if there are some guidelines available out there on calculating center of gravity on gas panel/box (VMB). I appreciate all the help you can give me.
 
hi joediz,
modern CAD and CAE programs have the capability to calculate center of gravity of any given geometry, if you have both of possibilities then choose the one from CAD, since this is more precisely concerning the discretization failure.

cheers,
ichwan
 
Hi joediz,

cg of the area can be found manualy or cad/cae
s/w as rightly said by my friend zuardy.if you want
to cross check you can do by known analytical
method available in some std. strength of materials
related subject.

cheers.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top