Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Center Drills

Status
Not open for further replies.
macduff

macduff

Mechanical
Joined
Dec 7, 2003
Messages
1,255
Location
US
Would anyone else like to see Center Drills added to the Hole Wizard? I'll put in an enhanacement request.
Colin
 
Sort by date Sort by votes
Are you talking about a center drill, like you drill in the end of a work piece for a lathe?

I have been out of the manufacturing area for a awhile now, is please forgive me if I misunderstand "center drills"

Regards,

Scott Baugh, CSWP [borg2]
CSWP.jpg

faq731-376
 
Upvote 0 Downvote
macduff,

Sounds like a great enhancement to me. I made my own library features of the standard sizes that I use. You just have to pick a face and a point for the c'drill.

mncad
 
Upvote 0 Downvote
Yes, it would be nice. I have to revolve-cut to show one. But don't use one very often.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

fcsuper
  • Locked
  • Question Question
What's the standard that specifies the size of center marks and when they should be added to holes?
Replies
6
Views
576
TheTick
TheTick
S
[SW Assembly] How to mate the center of a circle with a point?
Replies
1
Views
5K
JPARKER
J
borsht
  • Locked
  • Question Question
ordinate dimension to center of forshortened radius center. How can I do this
Replies
12
Views
1K
SBaugh
SBaugh
E
Solidworks drawing add centerline for sweep and lofts
Replies
0
Views
3K
es2058
E
PhoenixDynamometer
  • Locked
  • Question Question
Solidworks and Vertical Machining Center with Siemens 840D
Replies
5
Views
295
sammcc
sammcc

Part and Inventory Search

Sponsor

Back
Top