Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cavity Filled Ball Valve

Status
Not open for further replies.
cadymp

cadymp

Mechanical
Joined
Sep 8, 2003
Messages
8
Location
JP
I am Planning to develop Cavity Filled Ball Valves & will be fully Sanitary Design.
Before i start i want to know about Market Potential Pharma Industry . Also I want to know any other Industry where these valves are used.
Also pl. let me know, is there any specific Design& testing
standard is available for Sanitary application.
 
Status
Not open for further replies.

Similar threads

Bazinga
  • Locked
  • Question Question
Valve Cavity Pressurisation
Replies
6
Views
2K
LittleInch
LittleInch
E
  • Locked
  • Question Question
12" Ball Valve Repair
Replies
3
Views
3K
johnengkol
johnengkol
Inchtain
  • Question Question
Failure during Hydro Testing of 36" Ball Valve
Replies
12
Views
13K
CptMaaB
CptMaaB
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S
Inchtain
  • Question Question
Seat Rings of small and big size ball valves
Replies
3
Views
3K
Danlap
Danlap

Part and Inventory Search

Sponsor

Back
Top