Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
cavitation resistant material
- Thread starter arash807
- Start date
I guess it is needless to say that it is better to avoid cavitation than to look for a material to resist cavitation?
A351CF8 and A351CF8M have about the same hardness. So, I doubt that one is more resistant against cavitation than the other.
A351CF8 and A351CF8M have about the same hardness. So, I doubt that one is more resistant against cavitation than the other.
- Thread starter
- #3
Micalbrch
You are absolutely right,it is better to avoid cavitation,but sometimes we have to design a valve for cavitation.for example in two phase fluid or flashing systems.
my next question is that,is hardness the only item to compare cavitation resistant?
You are absolutely right,it is better to avoid cavitation,but sometimes we have to design a valve for cavitation.for example in two phase fluid or flashing systems.
my next question is that,is hardness the only item to compare cavitation resistant?
- Status
Similar threads
- Question
