Catia V6 - Converting a CGR file into Catia Part 1

[CAD2015]

Hi,

How could I convert a CGR file into Catia Part?
It shouldn't necessary be converted in solid only!
Thanks

MZ7DYJ

 

[ferdo]

Hi,

I don't know in v6 how is working but for v5 I've done in the past a small macro which had the logic bellow:

- open cgr by selecting in a folder
- save as model (v4)
- open model and save as CATPart (no solid, only surfaces)

You can try something similar.

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

https://picasaweb.google.com/103462806772634246699/

 

[CAD2015]

Thanks!

MZ7DYJ