Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CATIA V5 Inch Thread xml standard

Status
Not open for further replies.
jackk

jackk

Mechanical
Joined
Nov 22, 2002
Messages
1,312
Location
US
Can someone share the xml file for INCH threads, or tell me where to find a file to copy.

thanks, Jack
 
Sort by date Sort by votes
<?xml version="1.0" ?>
<std:node name="UnifiesInchScrDecimalSizes" type="Thread_standard" xmlns:std=" <std:typedef name="Standard">
<std:floatval name="ThreadDiameter" >0.</std:floatval>
<std:floatval name="Pitch" >1.</std:floatval>
<std:floatval name="NominalDiameter" >0.13</std:floatval>
<std:strval name="Description" >M8</std:strval>
</std:typedef>
<std:node name="Key">
<std:strval name="KeyDrafting" >M</std:strval>
<std:strval name="KeyDrafting" >NO_DESC_IN_DRAFTING</std:strval>
</std:node>
<std:node name="Unit">
<std:strval name="Unit" >in</std:strval>
</std:node>
<std:node name="Values">
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.25</std:floatval>
<std:floatval name="Pitch" >5.e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.201</std:floatval>
<std:strval name="Description" >1/4-20 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.25</std:floatval>
<std:floatval name="Pitch" >3.5714e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.213</std:floatval>
<std:strval name="Description" >1/4-28 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.3125</std:floatval>
<std:floatval name="Pitch" >5.5556e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.257</std:floatval>
<std:strval name="Description" >5/16-18 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.3125</std:floatval>
<std:floatval name="Pitch" >4.1667e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.272</std:floatval>
<std:strval name="Description" >5/16-24 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.375</std:floatval>
<std:floatval name="Pitch" >6.25e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.3125</std:floatval>
<std:strval name="Description" >3/8-16 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.375</std:floatval>
<std:floatval name="Pitch" >4.1667e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.332</std:floatval>
<std:strval name="Description" >3/8-24 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.4375</std:floatval>
<std:floatval name="Pitch" >7.1428e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.368</std:floatval>
<std:strval name="Description" >7/16-14 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.4375</std:floatval>
<std:floatval name="Pitch" >5.e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.390625</std:floatval>
<std:strval name="Description" >7/16-20 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.5</std:floatval>
<std:floatval name="Pitch" >7.6923e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.421875</std:floatval>
<std:strval name="Description" >1/2-13 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.5</std:floatval>
<std:floatval name="Pitch" >5.e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.453125</std:floatval>
<std:strval name="Description" >1/2-20 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.5625</std:floatval>
<std:floatval name="Pitch" >8.3333e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.484375</std:floatval>
<std:strval name="Description" >9/16-12 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.5625</std:floatval>
<std:floatval name="Pitch" >5.5556e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.515625</std:floatval>
<std:strval name="Description" >9/16-18 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.625</std:floatval>
<std:floatval name="Pitch" >9.0909e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.53125</std:floatval>
<std:strval name="Description" >5/8-11 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.625</std:floatval>
<std:floatval name="Pitch" >5.5556e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.578125</std:floatval>
<std:strval name="Description" >5/8-18 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.75</std:floatval>
<std:floatval name="Pitch" >0.1</std:floatval>
<std:floatval name="NominalDiameter" >0.65625</std:floatval>
<std:strval name="Description" >3/4-10 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.75</std:floatval>
<std:floatval name="Pitch" >6.25e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.6875</std:floatval>
<std:strval name="Description" >3/4-16 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.875</std:floatval>
<std:floatval name="Pitch" >0.111111</std:floatval>
<std:floatval name="NominalDiameter" >0.756625</std:floatval>
<std:strval name="Description" >7/8-9 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >0.875</std:floatval>
<std:floatval name="Pitch" >7.1428e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.8125</std:floatval>
<std:strval name="Description" >7/8-14 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.</std:floatval>
<std:floatval name="Pitch" >0.125</std:floatval>
<std:floatval name="NominalDiameter" >0.875</std:floatval>
<std:strval name="Description" >1-8 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.</std:floatval>
<std:floatval name="Pitch" >8.3333e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.921875</std:floatval>
<std:strval name="Description" >1-12 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.</std:floatval>
<std:floatval name="Pitch" >7.1428e-2</std:floatval>
<std:floatval name="NominalDiameter" >0.9375</std:floatval>
<std:strval name="Description" >1-14 UNS</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.125</std:floatval>
<std:floatval name="Pitch" >0.142857</std:floatval>
<std:floatval name="NominalDiameter" >0.984375</std:floatval>
<std:strval name="Description" >1 1/8-7 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.125</std:floatval>
<std:floatval name="Pitch" >8.3333e-2</std:floatval>
<std:floatval name="NominalDiameter" >1.046875</std:floatval>
<std:strval name="Description" >1 1/8-12 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.25</std:floatval>
<std:floatval name="Pitch" >0.142857</std:floatval>
<std:floatval name="NominalDiameter" >1.109375</std:floatval>
<std:strval name="Description" >1 1/4-7 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.25</std:floatval>
<std:floatval name="Pitch" >8.3333e-2</std:floatval>
<std:floatval name="NominalDiameter" >1.171875</std:floatval>
<std:strval name="Description" >1 1/4-12 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.375</std:floatval>
<std:floatval name="Pitch" >0.166667</std:floatval>
<std:floatval name="NominalDiameter" >1.21875</std:floatval>
<std:strval name="Description" >1 3/8-6 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.375</std:floatval>
<std:floatval name="Pitch" >8.3333e-2</std:floatval>
<std:floatval name="NominalDiameter" >1.296875</std:floatval>
<std:strval name="Description" >1 3/8-12 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.5</std:floatval>
<std:floatval name="Pitch" >0.166667</std:floatval>
<std:floatval name="NominalDiameter" >1.34375</std:floatval>
<std:strval name="Description" >1 1/2-6 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.5</std:floatval>
<std:floatval name="Pitch" >8.3333e-2</std:floatval>
<std:floatval name="NominalDiameter" >1.421875</std:floatval>
<std:strval name="Description" >1 1/2-12 UNF</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >1.75</std:floatval>
<std:floatval name="Pitch" >0.2</std:floatval>
<std:floatval name="NominalDiameter" >1.546875</std:floatval>
<std:strval name="Description" >1 3/4-5 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >2.</std:floatval>
<std:floatval name="Pitch" >0.222222</std:floatval>
<std:floatval name="NominalDiameter" >1.78125</std:floatval>
<std:strval name="Description" >2-4 1/2 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >2.25</std:floatval>
<std:floatval name="Pitch" >0.222222</std:floatval>
<std:floatval name="NominalDiameter" >2.03125</std:floatval>
<std:strval name="Description" >2 1/4-4 1/2 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >2.5</std:floatval>
<std:floatval name="Pitch" >0.25</std:floatval>
<std:floatval name="NominalDiameter" >2.25</std:floatval>
<std:strval name="Description" >2 1/2-4 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >2.75</std:floatval>
<std:floatval name="Pitch" >0.25</std:floatval>
<std:floatval name="NominalDiameter" >2.5</std:floatval>
<std:strval name="Description" >2 3/4-4 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >3.</std:floatval>
<std:floatval name="Pitch" >0.25</std:floatval>
<std:floatval name="NominalDiameter" >2.75</std:floatval>
<std:strval name="Description" >3-4 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >3.25</std:floatval>
<std:floatval name="Pitch" >0.25</std:floatval>
<std:floatval name="NominalDiameter" >3.</std:floatval>
<std:strval name="Description" >3 1/4-4 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >3.5</std:floatval>
<std:floatval name="Pitch" >0.25</std:floatval>
<std:floatval name="NominalDiameter" >3.25</std:floatval>
<std:strval name="Description" >3 1/2-4 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >3.75</std:floatval>
<std:floatval name="Pitch" >0.25</std:floatval>
<std:floatval name="NominalDiameter" >3.5</std:floatval>
<std:strval name="Description" >3 3/4-4 UNC</std:strval>
</std:typeval>
<std:typeval name="Standard">
<std:floatval name="ThreadDiameter" >4.</std:floatval>
<std:floatval name="Pitch" >0.25</std:floatval>
<std:floatval name="NominalDiameter" >3.75</std:floatval>
<std:strval name="Description" >4-4 UNC</std:strval>
</std:typeval>
</std:node>
</std:node>
 
Upvote 0 Downvote
thanks Weagan22
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
CATIA V5 ASSEMBLY DESIGN CONSTRAINS
Replies
4
Views
6K
ferdo
ferdo
H
FROM CATIA V5 TO MAXSURF
Replies
0
Views
280
Hamzamd
H
R
  • Question Question
CATIA V5 Automation creating Dimension
Replies
1
Views
1K
qiushui
qiushui
A
  • Locked
  • Question Question
CATIA v5 DRAFTING
Replies
5
Views
7K
amadali
A
D
Catia V5 Drawing uppercase
Replies
2
Views
1K
Rickyt
R

Part and Inventory Search

Sponsor

Back
Top