Gabpfe
Student
- Nov 27, 2021
- 1
In Catia v5, using the Thick Surface tool on a joined surface results in a volume with lines that do not connect which causes further issues when trying to apply fillets etc. The surface is made using the Multi-Section Surface tool and then joined using the Join tool.
I would like to be able to thicken the surface perpendicular into a volume but still have the edges connect so that I get an even edge on the inside of the wall as well. Any suggestions for how to achieve this? Thanks in advance
See linked reference image, the surface on the left, and the volume with broken edges on the right:
I would like to be able to thicken the surface perpendicular into a volume but still have the edges connect so that I get an even edge on the inside of the wall as well. Any suggestions for how to achieve this? Thanks in advance
See linked reference image, the surface on the left, and the volume with broken edges on the right: