Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Catia V5 Drawing problem.
- Thread starter Slaen
- Start date
1oldcaduser
Automotive
Have you got a point or line in one of the views that is out of the drawing frame. Activate each view in turn with the view frame turned on and see if one of them gets huge. If that happens then you have something off the frame.
If the view contains geometry, you don't need to activate it; it will already be on page, and reframing will convey this. (as will View -> Drawing Overview)
1oldcaduser - I think you are confused by the HV axis system in each view. THIS is what causes the view frame to expand when activated - NOT geoemetry.
---
CAD design engineering services - Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.
1oldcaduser - I think you are confused by the HV axis system in each view. THIS is what causes the view frame to expand when activated - NOT geoemetry.
---
CAD design engineering services - Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.
- Status