Hello all. I am having a problem with the display on V5. The specification tree(f3) does not appear on the screen at all. The scroll bar is all that shows when toggling with f3. Also, if I click and drag in the draw area the window that it creates stays on the screen untill I pan or do something else. Seems like a display problem. I have a GeForce FX5200 adapter and have the most recent driver fron Nvidia. Anybody have any ideas as to what could be causing this?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Catia V5 Display Problem
- Thread starter ratm905
- Start date
try this, if F3 doesn't do it:
click the axis (lower-right corner) to make the tree active (model geometry should dim), and click the FIT-ALL-IN icon to fit the tree to the screen.
If that doesn't work, click the axis again and click the FIT-ALL-IN again.
After you get the tree back, click the axis to make the model active
click the axis (lower-right corner) to make the tree active (model geometry should dim), and click the FIT-ALL-IN icon to fit the tree to the screen.
If that doesn't work, click the axis again and click the FIT-ALL-IN again.
After you get the tree back, click the axis to make the model active
Did you try switching to the tree and doing a 'fit all in'?
Click the little axis located in the bottom right of the screen, and do the 'Fit all in'.
I haven't bothered to check, but is that a supported video card?
-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog
Click the little axis located in the bottom right of the screen, and do the 'Fit all in'.
I haven't bothered to check, but is that a supported video card?
-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog
This is not a certified video card and the latest drivers are not the certified catia drivers. Load drivers 81.72 from nvidia
Regards,
Derek
Regards,
Derek
Sorry, Jackk. Looks like we posted over one another.
-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog
-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog
- Thread starter
- #6
Thanks a lot guys for the responses. Clicking the icon in the bottom right and then clicking fit all it worked. I am kinda new at this and am sorta trying to teach myself some basic catia stuff. I am a Mechanical Desktop designer by trade. Kinda hard to learn anything in V5 without the tree. Again, thanks a million, you were all very helpfull.
- Status
