Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia V5 & NX

Status
Not open for further replies.
dwoody1

dwoody1

Mechanical
Joined
Feb 25, 2003
Messages
23
Location
US
Hello All,

Can you open a Catia v5 part (.catpart) in UG NX1 or NX2 not using STEP or IGES. I heard that you may be able.

Thanks,
 
Sort by date Sort by votes
No... only v4 solids right now. And be aware that (in my brief testing experiences) the process of translating the v4 solid to UG creates a faceted body, not a solid. So... the usefulness of the direct translator remains in question at my customer's location. We still use STP to translate out of Catia V4. Another current drawback is that Catia assemblies are not supported.

-Derek
DL Engineering Services

specializing in CAD Design Consultation Services
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
  • Question Question
NX Journal
Replies
15
Views
22K
Toost
Toost
CAD2015
  • Question Question
NX X.....................
Replies
9
Views
2K
DrPriest
DrPriest
CAD2015
  • Solved
NX assembly exploded view vs NX arrangements.....
Replies
4
Views
3K
Toost
Toost
CAD2015
  • Question Question
NX 2212: Subtraction error.......
Replies
11
Views
2K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
NX Sketch dimension.....
Replies
2
Views
2K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top