Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia sweep command spine input

Status
Not open for further replies.
NaWin55

NaWin55

Mechanical
Joined
Mar 21, 2020
Messages
98
Location
IN
Hello all

i need to create a sweep using SweepLinetype and i need to use Axis system directions as Spine
i cant create line in X or Y or Z directions and use them as Spine
i need to select the Axis system and when axis system is selected i need to get the Y direction as spine

as shown in below image

Capture_kfhd2t.jpg


is it possible to get the direction like that using macro

Thank you
 
Status
Not open for further replies.

Similar threads

A
Catia Thick Surface Command Failed
Replies
3
Views
1K
MrCATIA
M
G
trigger catia
Replies
4
Views
3K
Little Cthulhu
Little Cthulhu
CAD2015
  • Question Question
3DEXPERIENCE - Catia on cloud.........
Replies
5
Views
12K
CAD2015
CAD2015
B
  • Question Question
Catia Bom listing reports
Replies
0
Views
5K
bambam54
B
A
  • Question Question
CATIA SKETCH GRAPHICS
Replies
3
Views
6K
jackk
jackk

Part and Inventory Search

Sponsor

Back
Top