Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia simulation, how to define movement by points

  • Thread starter Thread starter cicoks
  • Start date Start date
C

cicoks

Guest
I want to create simple pick and place simulation with my robot, but I don't know how to bring my robot into certain position to catch my object properly. I only know how manipulate my robot with commands (angle and length of joints) but it seems like to much work to bring him in right position manually. Is there any way to put like contact constraint between my gripper and object in each point in simulation or something like that?

Screenshot of my robot and little object on table is in attachment.

Thanks,
cicoks
 

Attachments

  • catia.jpg
    catia.jpg
    10.6 KB · Views: 2
Which CATIA workbench are you using?

There is a Robotics application in DELMIA (CATIA's sister product for manufacturing applications). click here
 

Part and Inventory Search

Sponsor

Back
Top