Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Catia model
- Thread starter geo12
- Start date
Hi,
If you are working in v4, you can use the KEEP function in order to keep some solids from your .model file and save in a new file.
To transfer to igs file, you have to use the CATIGS utility (see also the FAQ in this forum).
Regards
Fernando
If you are working in v4, you can use the KEEP function in order to keep some solids from your .model file and save in a new file.
To transfer to igs file, you have to use the CATIGS utility (see also the FAQ in this forum).
Regards
Fernando
- Status
