Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CATIA LINKS MODIFICATIONS....... 1
- Thread starter CAD2015
- Start date
-
1
- #2
are you asking about MODIFY LINKS?
I use this when making a drawing based on a multi-body part. (for example: a weldment)
It let's me make a view of only one (could be more than one) body, and omits the other bodies.
It works similar to OVERLOAD PROPERTIES, which is used for assembly drawings.
I use this when making a drawing based on a multi-body part. (for example: a weldment)
It let's me make a view of only one (could be more than one) body, and omits the other bodies.
It works similar to OVERLOAD PROPERTIES, which is used for assembly drawings.
- Thread starter
- #3
![[2thumbsup]](/data/assets/smilies/2thumbsup.gif "[2thumbsup] [2thumbsup]")
- Status