May 24, 2010 #1 mbelly84 Mechanical Mar 23, 2010 22 this may be one stupid question, but: why select a cast iron body for a globe valve?
May 24, 2010 #2 gerhardl Mechanical Feb 25, 2007 2,025 Cost/benefit lifetime consideration. ... or if you want a more pure technical answer you will have to start narrowing your question down by including all process parameters for the fluid. Upvote 0 Downvote
Cost/benefit lifetime consideration. ... or if you want a more pure technical answer you will have to start narrowing your question down by including all process parameters for the fluid.
May 25, 2010 #3 hsbcn Mechanical May 15, 2009 254 A cheap & sturdy option for low-demand application... My focus: Alloy Valves Duplex Valves Super Duplex Valves Monel Valves Inconel Valves [link titanium-valves.com]Titanium Valves[/url] http://www.6-moly-valves.com Upvote 0 Downvote
A cheap & sturdy option for low-demand application... My focus: Alloy Valves Duplex Valves Super Duplex Valves Monel Valves Inconel Valves [link titanium-valves.com]Titanium Valves[/url] http://www.6-moly-valves.com
