Carnegie Fitting

[JedClampett]

I'm trying to design a harnessed push on fitting cast into a concrete wall. It's for a 90 inch steel pipe. I'd like to check my clearances, but to do so I need the Carnegie Fitting dimensions. When I ask the people in our office, they act like I have three heads.
Is there anywhere, on line or otherwise, where I can get Carnegie Fitting dimensions? They have to be standardized. I've already checked AWWA M11.

 

[nackra]

http://www.nov.com/Ameron/WaterTransmission/Resource_Library/RCCP_brochure.pdf

Ameron makes the Carnegie joint design (double gasket).

The fittings for the 54-inch pipeline job that I worked on were custom fabricated.

I would suggest contacting Ameron engineering staff

 

[robyengIT]

I am Italian but I do not know what does it mean "carnegie fitting". If it is something similar to the one suggested by Nackra You can visit the ACPPA-American Concrete Pressure Pipes Association's site where You can find ALL the manufacturers of such a item in U.S.A. and Canada. They can supply You both spigot and socket steel ring joints according to their standards so that You can adjust them to Your need

 

[robyengIT]

Yes, confirmed
Visit ACPPA.org for membership

in the meantime please find attached a brochure of Hanson showing carnegie fitting

 

[bimr]

What you are seeking is not an off the shelf item.

See page 71:

https://www.steeltank.com/Portals/0/pubs/Welded Steel Pipe 10.10.07.pdf

http://www.columbiapipe.com/pin_assets/pin_data/parsed/dresser/brochure/penstock_brochure.pdf

One of these firms should be able to assist you.

http://www.smith-blair.com/assetts/pdf/master_brochures/water_catalog.pdf

http://www.jcmindustries.com/media/15880/JCM March 2010 Product Directory SFS.pdf

 

[rconner]

Dimensions of fabricated steel water pipe fittings are addressed in AWWA C208 standard -- that being said, if specific dimensions of the fitting and joints are critical to the application, I likewise recommend you contact the fabricator for the particulars you are interested in (as bimr is right, 90-inch fittings are not off the shelf items).