Cardboard packaging tolerances and norms

[Znjmech]

Hi all

I'd like to know if there is anything mentioned in an standard or norm about the admissible dimensions of the cardboard box to avoid damages to the product during transportation?

 

[MadMango]

There are standards (not free) from the Fiber Box Association and Packaging Machinery Manufacturers Institute. Much of the tolerances depend on the type of cardboard; flute size, single wall, double wall, etc, etc. E or F flute is going to have a smaller, achievable manufacturing tolerance than B or A flute.

https://fibrebox.myshopify.com/collections/all

"Art without engineering is dreaming; Engineering without art is calculating."

Have you read faq731-376 to make the best use of these Forums?