Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Carbon fiber bike frame.

Status
Not open for further replies.

Axehandler

Electrical
Apr 12, 2002
1
Newbie here,
I a am building a recumbant bike. Have decided to try carbon fiber fabric and epoxy/resin as a frame material, however i know virtually nothing about the material. Suggestions on type of fabric, epoxy, and how many wraps to provide suifficient stregnth. The frame is approx. 4ft. long and 2.5 to 3 inches in diameter single tube. I plan to wrap the carbon around an extruded polystyrene mould.

help.
Axehandler
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor