Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Carbon fiber A-arms

Status
Not open for further replies.
jwaus

jwaus

Mechanical
Joined
Dec 21, 2006
Messages
1
Location
AU
Hi

just want to know if anyone has had experience in making carbonfibre a-arms for open wheel race cars. mainly in the area of bonding/attaching rod-ends to the carbon tube section.

thanks
john
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
Transverse Properties of Carbon Fiber
Replies
5
Views
4K
Compositepro
Compositepro
Cisnerjo
  • Locked
  • Question Question
Plaster Mandrels alternative materials for washout mandrels (fiber glass air ducts)
Replies
2
Views
994
Cisnerjo
Cisnerjo
Oluwakay
  • Locked
  • Question Question
HOW TO OBTAIN ORTHOTROPIC PARAMETERS FOR A FIBER REINFORCED COMPOSITE
Replies
2
Views
1K
Oluwakay
Oluwakay
astro_boy
  • Locked
  • Question Question
Dissimilar Material between Carbon Steel Flange to Stainless Steel Strainer
Replies
2
Views
771
SWComposites
SWComposites
Cisnerjo
  • Locked
  • Question Question
When to use a N4 or N10 air breather
Replies
1
Views
1K
Compositepro
Compositepro

Part and Inventory Search

Sponsor

Back
Top