Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cant see mesh moving when use ALE technique and UMESHMOTION code

Status
Not open for further replies.
Majid_F93

Majid_F93

Geotechnical
Joined
Feb 2, 2018
Messages
27
Location
IR
Hi
I am using ALE technique and umeshmotion code in my model for simulate sand production. My model run very well and finaly my job completed, but in visualization module , I cant see mesh moving.Do I need insert something in my model for seeing mesh moving?
 
Status
Not open for further replies.

Similar threads

polak7
  • Locked
  • Question Question
Steel rolling process with large deformation - implementing ALE adaptive meshing
Replies
3
Views
2K
FEA way
FEA way
S
  • Locked
  • Question Question
Error When Calculating Minimum Stable Time Increment for Bottom-up Mesh
Replies
8
Views
5K
suz_02
S
swahlgren
  • Question Question
Splitting part while keeping mesh
Replies
2
Views
14K
swahlgren
swahlgren
IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
11K
IcarusAero223
IcarusAero223
E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top